NOTE:
Before working inside your computer, read the safety information that shipped with your computer and follow
the steps in
Before working inside your
working inside your
computer. For more safety best practices, see the Regulatory Compliance home page at
regulatory_compliance.
Topics:
•
Procedure
•
Post-requisites
Procedure
1. Slide the I/O-board cable into the connector on the I/O board and close the latch to secure the cable.
2. Slide the ports on the I/O board into the slots on the base cover and snap the I/O board into place.
3. Align the screw hole on the I/O board with the screw hole on the base cover.
4. Replace the screw (M2x3) that secures the I/O board to the base cover.
5. Slide the I/O-board cable into the connector on the system board and close the latch to secure the cable.
Post-requisites
1. Replace the battery.
2. Follow the procedure from step 2 to step 5 in
22
Replacing the I/O board
Replacing the I/O board
computer. After working inside your computer, follow the instructions in
"Replacing the base
cover".
8
After
www.dell.com/