NOTE:
Before working inside your computer, read the safety information that shipped with your computer and follow
the steps in
Before working inside your
working inside your
computer. For more safety best practices, see the Regulatory Compliance home page at
regulatory_compliance.
Topics:
•
Procedure
•
Post-requisites
Procedure
1. Follow the step 4 procedure in
2. Slide the tab on the battery (applicable for configuration with hard drive only) under the hard-drive bracket and place the
battery on the palm-rest and keyboard assembly.
3. Align the screw holes on the battery with the screw holes on the palm-rest and keyboard assembly.
4. Replace the three screws (M2x3) that secure the battery to the palm-rest and keyboard assembly.
5. Connect the battery cable to the system board.
Post-requisites
Follow the procedure from step 2 to step 5 in
18
Replacing the battery
computer. After working inside your computer, follow the instructions in
"Replacing the I/O
board".
"Replacing the base
Replacing the battery
cover".
6
After
www.dell.com/