Chapter 10: Replacing The Heat Sink; Procedure; Post-Requisites - Dell Inspiron 11 3000 Service Manual

NOTE: Before working inside your computer, read the safety information that shipped with your computer and follow
the steps in Before working inside your
working inside your computer. For more safety best practices, see the Regulatory Compliance home page at
regulatory_compliance.
CAUTION: Incorrect alignment of the heat sink can damage the system board and processor.
NOTE: If either the system board or the heat sink is replaced, use the thermal pad/paste provided in the kit to ensure that
thermal conductivity is achieved.
Topics:
•

Procedure

•

Post-requisites

Procedure
1. Place the heat sink on the system board and align the screw holes on the heat sink with the screw holes on the system
board.
2. In sequential order (as indicated on the heat sink), tighten the captive screws that secure the heat sink to the system board.
Post-requisites
1. Replace the battery.
2. Follow the procedure from step 2 to step 5 in
24 Replacing the heat sink
Replacing the heat sink
computer. After working inside your computer, follow the instructions in
"Replacing the base cover".
10
After
www.dell.com/