Replacing The Power-Adapter Port; Procedure; Post-Requisites - Dell P78G Service Manual

Replacing the power-adapter
port
WARNING: Before working inside your computer, read the safety
information that shipped with your computer and follow the steps in
working inside your
the instructions in
practices, see the Regulatory Compliance home page at
regulatory_compliance.

Procedure

1 Place the power-adapter port into the slot on the computer base.
2 Align the screw hole on the power-adapter port bracket with the screw hole on
the computer base.
3 Replace the four screws (M2x3) that secure the power-adapter port bracket to
the computer base.
4 Route the power-adapter port cable through the routing guides on the computer
base.
5 Close the display and turn it over.
6 Connect the power-adapter port cable to the system board.

Post-requisites

1 Follow the procedure from step 3 to step 9 in
keyboard assembly".
2 Replace the rear
3 Replace the battery.
4 Replace the base
60
computer. After working inside your computer, follow
After working inside your
cover.
cover.
computer. For more safety best
www.dell.com/
"Replacing the palm rest and
Before