Replacing The Power-Adapter Port; Procedure; Post-Requisites - Dell Inspiron 14-5455 Service Manual

Replacing the power-adapter
port
WARNING: Before working inside your computer, read the safety
information that shipped with your computer and follow the steps in
Before working inside your
computer, follow the instructions in
computer. For more safety best practices, see the Regulatory
Compliance home page at dell.com/regulatory_compliance.

Procedure

1 Place the power-adapter port into the slot on the palm-rest assembly.
2 Route the power-adapter port cable through its routing guides on the
palm-rest assembly.
3 Replace the screw that secures the power-adapter port to the palm-rest
assembly.

Post-requisites

1 Replace the system
2 Replace the I/O
3 Replace the heat-sink
4 Replace the computer
5 Replace the keyboard.
6 Replace the wireless
7 Follow the procedure from step 5 to step 7 in
8 Replace the memory
9 Replace the optical
10 Replace the base
11 Replace the battery.
computer. After working inside your
board.
board.
assembly.
base.
card.
modules.
drive.
cover.
After working inside your
"Replacing the hard drive".
65