Replacing the I/O board
WARNING: Before working inside your computer, read the safety
information that shipped with your computer and follow the steps in
working inside your
the instructions in
practices, see the Regulatory Compliance home page at
regulatory_compliance.
Procedure
1
Align the screw holes on the I/O board with the screw holes on the palm rest
and keyboard assembly.
2
Replace the two screws (M2x3) that secure the I/O board to the palmrest and
keyboard assembly.
3
Connect the I/O-board cable to the I/O board.
Post-requisites
1
Replace the battery.
2
Replace the
base
44
computer. After working inside your computer, follow
After working inside your
cover.
computer. For more safety best
www.dell.com/
Before