Table of Contents
Advertisement
NOTE:
Before working inside your computer, read the safety information that shipped with your computer and follow
the steps in
Before working inside your
working inside your
computer. For more safety best practices, see the Regulatory Compliance home page at
www.dell.com/regulatory_compliance.
Procedure
1. Using the alignment posts, place the I/O board on the palm rest and keyboard assembly.
2. Replace the screw (M2x4) that secures the I/O board to the palm rest and keyboard assembly.
3. Connect the I/O-board cable to the system board and close the latch to secure the cable.
4. Connect the coin-cell battery cable to the I/O board.
Post-requisites
1. Replace the
hard
drive.
2. Replace the battery.
3. Replace the
base
cover.
Replacing the I/O board
computer. After working inside your computer, follow the instructions in
33
After
Replacing the I/O board
61
Advertisement
Table of Contents
