Warranty Information - µ-Dimension D4006 User Manual

Warranty Information

Leviton Manufacturing Co Inc. warrants its Dimmer Systems and Controls
to be free of material and workmanship defects for a period of two years
after system acceptance or 26 months after shipment, whichever comes
first. This Warranty is limited to repair of replacement of defective
equipment returned Freight Pre-Paid to Leviton Lighting Control Division
at 20497 Teton Ave., Tualatin, Oregon 97062, USA. User shall call 1-800-
959-6004 and request a return authorization number to mark on the
outside of the returning carton, to assure that the returned material will
be properly received at Leviton. All equipment shipped back to Leviton
must be carefully and properly packed to avoid shipping damage.
Replacements or repaired equipment will be returned to sender freight
prepaid, F.O.B. factory. Leviton is not responsible for removing or
replacing equipment on the job site, and will not honor charges for such
work. Leviton will not be responsible for any loss of use time or
subsequent damages should any of the equipment fail during the
warranty period, but agrees only to repair or replace defective equipment
returned to its plant in Tualatin, Oregon. This Warranty is void on any
product that has been improperly installed, overloaded, short circuited,
abused, or altered in any manner. Neither the seller nor Leviton shall be
liable for any injury, loss or damage, direct or consequential arising out
of the use of or inability to use the equipment. This Warranty does not
cover lamps, ballasts, and other equipment which is supplied or
warranted directly to the user by their manufacturer. Leviton makes no
warranty as to the Fitness for Purpose or other implied Warranties.
FCC Compliance Statment
This device complies with the Class A limits of part 15 of the FCC
rules. These limits are designed to provide reasonable protection
against harmful interferance when the quipment is operated in a
commerical environment. This device generates, uses, and can
radiate radio frequency energy. If not installed & used in
accordance with the instruction manual, this device may cause
harmful interference to radio communications. Operation of this
in a residential area is likely to cause harmful interference in
which the user will be required to correct the interference at his
own expense.