µ-Dimension D4006 User Manual page 24

To Assign Zones, consecutively, from a Starting Channel
Number:
Step 1:
Step 2:
Step 3:
To Assign Zones, non-consecutively, or edit a particular
zone's settings:
Step 1:
Step 2:
Zone
Number
Adjust Zone Number with
•
Toggle between the Zone Number and CHANN/GROUP
•
setting with
Toggle between the Zone/Channel adjustment with
•
SELECT
Page 25
From the advanced menus (see page 19), find the
menu which reads:
ASSIGN ZONES?
Use Down
ASSIGN ZONES:
START CHAN=0001
Enter the starting channel number for the first zone on
this device, then press SELECT. Your zones then will
be renumbered.
From the advanced menus (see page 19), find the
menu which reads:
ASSIGN ZONES?
Make adjustments as follows:
ASSIGN ZONES:
Z01:CHANN=0001
Left
MENU
then press SELECT.
buttons until the display reads:
then press SELECT. The channel
number should be flashing.
MENU
then press SELECT.
Up
and Right
Channel
Number
Channel
Number
or Down