Viewing Scheduled Events; Sequencer - µ-Dimension D4006 User Manual

Press the Up
Step 8:
another Event and repeat all steps until all Events
have been programmed.
Press the Menu/Cancel button when you are
Step 9:
finished editing events.
You return to the
•
The LCD display times out and returns to MANUAL
MODE if no changes are made for 60 seconds.
Enabling the Scheduler
To enable or disable the scheduler:
Press the Menu/Cancel button.
Step 1:
Press the Up
Step 2:
SCHEDULER= flashes on the LCD display.
Press the Select/Save button.
Step 3:
The current status of the scheduler flashes.
•
Press the Up
Step 4:
the value.
Press the Select/Save button to save the value.
Step 5:
Press the Menu/Cancel button to exit this menu.
Step 6:

Viewing Scheduled Events

To view currently scheduled Events:
Press the Menu/Cancel button.
Step 1:
Press the Up
Step 2:
SCHEDULE? flashes on the LCD display.
Press the Select/Save button.
Step 3:
Scheduled Events are displayed in the same format as
•
for editing above.

Sequencer

The sequencer causes Scenes to be activated in a timed
sequence. The sequence may be programmed to run once or
continuously in a loop. The sequence can be activated manually
(preset/scene buttons) or by the event timer (scheduler). The
Leviton Dimensions 4000 Series Architectural Lighting Controller
and Down
VIEW SCHEDULE?
and Down
and Down
and Down
Configuration Guide
buttons to select
menu command.
buttons until
buttons to change
buttons until VIEW
Page 64