Installation Recommendations
For best results using the Dimension 4000 Architectural Lighting
Controllers, follow these recommendations:
Plan the system before beginning the installation:
1:
Device location and primary purpose
•
Determine which controllers are controlling which
•
dimmers
Determine location and function of remote stations
•
Consider power supply, wire size, run length, load
•
requirements
Consider any regularly scheduled events.
•
Follow the installation instructions covering physical
2:
installation, connections and wring of your device
Use the information in this "setup" section of this guide for
3:
initial setup, and the "configuration" section for regular
programming.
When configuring a system with multiple devices it's helpful
4:
to connect them one at a time so that any problems are
isolated as they arise. For example:
First install & configure master stations,
•
Confirm that the master station is working correctly,
•
Install first entry station (or device), configure it, and
•
confirm that it's working correctly
Repeat until all device are installed
•
Leviton Dimensions 4000 Series Architectural Lighting Controller
Configuration Guide
Page 6