µ-Dimension D4006 User Manual page 30

Groups A (B, C D)
Each dimmer may be assigned to up to four groups, identified as
'Group A', 'Group B', 'Group C', and 'Group D'. Groups are a
collection of dimmers and relays which when controlled as a
group are always controlled together. Valid values for a group are
0-9999. Each group setting must be set to a group number, or,
'None'. For more information about group and how they can be
used, please see "Groups" on page 26.
For more information about how to control groups with a D4200
or D4206 series controller, please see "To Assign Zones, non-
consecutively, or edit a particular zone's settings:" on page 25.
Readback
Indicates whether or not a dimmer will respond to a level or
readback request from the network. The default setting is Yes. If
you have a situation where more than one dimmer, relay, or other
device is assigned to the same network channel, readback should
only be enabled for one. Valid settings are as follows:
Yes - dimmer will respond to level request
•
No - dimmer will not respond to level request
•
Room
Each dimmer can be assigned to a room. This setting is for
compatible with future released product.
Configuration of Dimmers at another panel
D4206 and D4206 product can be used to configure the dimmers
belonging to another D4000 series product (the 'remote') from
the local device. Configuration of the remote dimmers is identical
to the process for configuring the local dimmers except first you
must select the remote to configure. To start the process of
configuring remote dimmers:
Page 31