Table of Contents
Advertisement
Checking Scene Names
You can check for a Scene name without initiating the Scene.
To Check the Scene Name:
Step 1:
Step 2:
Step 3:
Using the Optional Remote Control
If you have purchased the optional infrared remote control, you
can use it to operate the Master RAISE/ LOWER, SCENE, MAX
and OFF buttons in the same manner as indicated above. The
maximum range for the remote control is approximately 30 feet,
line of sight. Additional infrared receivers are also available.
Navigating the Menus
To navigate the configuration and setup menus, use the
navigation buttons:
• Left
forth, or to the previous or next item.
• Up
submenus; changes selected values.
• Select/Save. Selects a value to be modified; saves the
modified value.
• Menu/Cancel. Enters menu mode; exits submenus; exits
menu mode.
• Clear. Clears or returns a selected value to zero.
Page 49
Press the CLEAR Button
Immediately Press the SCENE button you are
interested in.
To View another Scene name, Repeat from Step 1.
Select
Menu
Save
Cancel
Figure 11 - Programming Buttons
and Right
and Down
Page
Clear
Zones
. Moves the cursor back and
. Scrolls through menus and
Advertisement
Table of Contents
