Figure 14 - Scene, MAX and OFF button Locations
SCENES 1-8.
•
programmed set of lighting levels to fade in while the
previously selected Scene fades out.
By default raises all zones to full.
MAX.
•
By default, raises all zones to zero output.
OFF.
•
With the cover open, you can also access the LCD display, the
Master Up
and Down
buttons, the Zone level indicators, and the programming/
navigation buttons.
Navigating Menus
To navigate the menus, use the programming/navigation
buttons:
Figure 11 - Programming Buttons
• Left
forth, or to the previous or next item.
• Up
submenus; changes selected values.
• Select/Save. Selects a value to be modified; saves the
modified value.
• Menu/Cancel. Enters menu mode; exits submenus; exits
menu mode.
• Clear. Clears or returns a selected value to zero.
• Page Zones. Alternates the Zone numbers between 1-8
and 9-16, 17-24 and 25-32. The LCD will indicate which
Page you are currently in. P1 refers to Zones 1-8, P2
Leviton Dimensions 4000 Series Architectural Lighting Controller
Selects a new Scene, and causes a pre
and Down
buttons, the individual Zone Up
buttons, the Zone identification and status
Select
Menu
Save
Cancel
and Right
and Down
. Scrolls through menus and
Page
Clear
Zones
. Moves the cursor back and
Configuration Guide
Page 8