µ-Dimension D4006 User Manual page 62

• Set to +SS/-SS to choose on offset time before or after
sunset
•Set to +SR/-SR to choose an offset time before or after
sunrise
• Action is what will occur:
•None
•Seq. Step - Starts a Sequence at a particular step
•Cell ON - Photocell option on at the a-2000 dimmer rack
•Resume - Resumes the Sequencer
•Seq OFF - Sequencer Off
•Seq ON - Sequencer Om
•OFF - Press the OFF button
•MAX - Press the MAX button
•S01....S16 - Press a Scene button
•Note: Press Clear to return the value to NONE. Setting
the Erasing a Scene effectively erases the Event.
• Days of Week - determines on what days of week this
event will trigger. One position for each of the 7 days of the
week:
•Day of week listed, i.e. 'M' for Monday indicates that the
event will occur on that day
•Day of week absent, i.e. '-' for Monday indicates that
the event will not occur on that day
• Blink Warn - indicates whether or not a blink warn will be
triggered for this event. A blink warn is simply a brief off/on
of the lights indicating that values are about to change.
Usually blink warns are only used to signal that lights are
about to turn off. The user can then override the blink warn
by pressing any key. See page 39 for additional settings
which affect the operation of Blink Warns, and see page 28
which discusses disabling blink warn for a particular
dimmer
Step 7:
The Event number flashes again.
•
Page 63
Press the Select/Save button to save these values for
the Event.