Setting The Station Lock Code - µ-Dimension D4006 User Manual

Step 3:
The CODE field flashes
•
Step 4:
Note: Press
•
Step 5:
• SET RECORD LOCK?
Step 6:

Setting the Station Lock Code

The Station Lock Code must be a number between 000 and 999.
The default code is 000.
To set the station lock code:
Step 1:
Step 2:
Step 3:
The CODE Field flashes
•
Step 4:
Press
•
Step 5:
Step 6:
Step 7:
Enabling the Record Lock
Page 59
Press the Select/Save button.
Press the Up
the value.
Clear
Press the Select/Save button to save the value.
Press the Menu/Cancel button to exit this menu.
Shortcut: Use a code number between 000 and 999,
as the Preset - Scene buttons 1 to 8 and MAX (9) and
OFF (0) can be used to enter the code directly.
Press the Menu/Cancel button.
Press the Up
STATION LOCK flashes on the LCD display.
Press the Select/Save button.
Press the Up
the value.
to reset the value to
Clear
Press the Select/Save button to save the value.
SET STATION LOCK? flashes again.
Press the Menu/Cancel button to exit this menu.
Be sure to set the Record Lock code before enabling
the Record Lock.
and Down
to reset the value to
flashes again.
and Down
and Down
buttons to change
.
000
buttons until SET
buttons to change
.
000