Overriding A Lock - µ-Dimension D4006 User Manual

Overriding a Lock

If the control station is locked by a code number, the LCD displays
ENTER CODE when a locked operation is attempted.
To override a lock:
Step 1:
Press
•
Step 2:
The originally selected operation begins and the unit
•
remains unlocked for approximately 5 minutes.
Page 61
Press the Up
the programmed code number (000-999).
to begin entering numbering from zero (0).
Clear
Shortcut: Use a code number between 000 and 999,
as the Preset - Scene buttons 1 to 8 and MAX (9) and
OFF (0) can be used to enter the code directly.
Press the Select/Save button to enter the value.
The PIN 6 key lock input on the Luma-Net connector
always locks the station overriding the station lock
and there is no "Pass Code" to override this lock.
and Down buttons to enter