Status:operation:ptransition <Nr1 - ITech IT8000 Series Programming Manual

Returns
<NR1>
STATus:OPERation:PTRansition <NR1>
Sets the value of the PTR (Positive-Transition) registers. These registers serve
as a polarity filter between the Operation Condition and Operation Event regis-
ters. When a bit in the PTR register is set to 1, then a 0-to-1 transition of the cor-
responding bit in the Operation Condition register causes that bit in the
Operation Event register to be set. STATus:PRESet sets all bits in the PTR
registers and clears all bits in the NTR registers.
Group
STATus
Syntax
STATus:OPERation:PTRansition <NR1>
Arguments
<NR1>
A decimal value corresponding to the binary weighted sum of the register's bits.
Setting range: 0 to 65535.
Default Value
0
Example
Enable bit 3 and 4 in the PTR register: STATus:OPERation:PTRansition 24
Query Syntax
STATus:OPERation:PTRansition?
Returns
<NR1>
Copyright © Itech Electronic Co., Ltd.
STATus Subsystem
83