Remote Interface Connections - ITech IT8000 Series Programming Manual

•

1.7 Remote Interface Connections

Please refer to user manual for detailed introductions of the remote interface
connections.
DISPlay {OFF|0|ON|1}
ASCII string parameter
String parameter may actually include all ASCII character sets. Character
strings must start and end with paired quotation marks; and single quotation
marks or double quotation marks are both allowed. Quotation mark separa-
tors may also act as one part of a string, they can be typed twice without any
character added between them. String parameter is used in the following
command:
DISPlay:TEXT <quoted string>
For example, the following commands display message of "WAITING..."
(without quotation marks) on the front panel of the instrument.
DISP:TEXT "WAITING..."
Single quotation marks may also be used to display the same message.
DISP:TEXT 'WAITING...'
– <SPD>: string program data. String parameters enclosed in single or
double quotes.
– <CPD>: character program data.
If the user want to change the settings of the instrument, for instance, the in-
put setting value, the command SYST:REM must be sent to the instrument
after finishing the connection between the instrument and PC.
Copyright © Itech Electronic Co., Ltd.
SCPI Introduction
11