Source:]Current:slew[:Both] <Nrf; Source:]Current:slew:positive <Nrf - ITech IT8000 Series Programming Manual

Returns
<NRf+>
12.5 [SOURce:]CURRent:SLEW[:BOTH] <NRf+>
This command is used to set the current rise and fall time, that is, the two times
are set at the same time and take effect at the same time.
Group
SOURce
Syntax
[SOURce:]CURRent:SLEW[:BOTH] <NRf+>
Arguments
<NRf+>
MINimum|MAXimum|DEFault|<value>
Setting range: MIN~MAX
Default Value
None
Example
CURR:SLEW[:BOTH] 1
Query Syntax
[SOURce:]CURRent:SLEW[:BOTH]?
Returns
<NRf+>
12.6 [SOURce:]CURRent:SLEW:POSitive <NRf+>
This command is used to set the current rise time.
Copyright © Itech Electronic Co., Ltd.
SOURce Subsystem
126