Opc - ITech IT8000 Series Programming Manual

Syntax
*IDN?
Arguments
None
Default Value
None
Returns
<AARD>
Example
*IDN?
Also see
None

*OPC

Sets the OPC (operation complete) bit in the standard event register. This oc-
curs at the completion of the pending operation.
•
•
•
Group
None
Syntax
*OPC
The purpose of this command is to synchronize your application with the
instrument.
Used in conjunction with initiated acquisitions, transients, output state
changes, and output settling time to provide a way to poll or interrupt the
computer when these pending operations complete.
Other commands may be executed before the operation complete bit is set.
Copyright © Itech Electronic Co., Ltd.
IEEE-488 Common Commands
167