[Configurable:]Io:pulse:width <Nrl>, <Nrf - ITech IT8000 Series Programming Manual

Default Value
None
Returns
<NR1>
Example
IO:PWM:DUTY? 1
Also see
None
[CONFigurable:]IO:PULSe:WIDTh <NRL>, <NRf+>
This command is used to set the pulse width of the specified pin.
Group
CONFigurable
Syntax
[CONFigurable:]IO:PULSe:WIDTh <NRL>, <NRf+>
Arguments
<NRL>, <NRf+>
0 to 6, MINimum|MAXimum|DEFault|<value>
Default Value
0, 0
Returns
None
Example
Set the pulse width of the pin 1 to 1S: IO:PULS:WIDT 0, 1
Copyright © Itech Electronic Co., Ltd.
CONFigurable Subsystem
50