Status:questionable:ntransition <Nr1 - ITech IT8000 Series Programming Manual

Returns
<NR1>
STATus:QUEStionable:NTRansition <NR1>
Sets the value of the NTR (Negative-Transition) registers. These registers serve
as a polarity filter between the Questionable Condition and Questionable Event
registers. When a bit in the NTR register is set to 1, then a 1-to-0 transition of
the corresponding bit in the Questionable Condition register causes that bit in
the Questionable Event register to be set. STATus:PRESet sets all bits in the
PTR registers and clears all bits in the NTR registers.
•
•
•
Group
STATus
Syntax
STATus:QUEStionable:NTRansition <NR1>
Arguments
<NR1>
A decimal value corresponding to the binary weighted sum of the register's bits.
Setting range: 0 to 65535.
Default Value
0
If the same bits in both NTR and PTR registers are set to 1, then any transi-
tion of that bit at the Questionable Condition register sets the corresponding
bit in the Questionable Event register.
If the same bits in both NTR and PTR registers are set to 0, then no transi-
tion of that bit at the Questionable Condition register can set the correspond-
ing bit in the Questionable Event register.
The value returned is the binary-weighted sum of all enabled bits in the
register.
Copyright © Itech Electronic Co., Ltd.
STATus Subsystem
79