Table of Contents
Advertisement
Default Value
0|OFF
Example
CURR:PROT:STAT 1
Query Syntax
[SOURce:]CURRent[:OVER]:PROTection:STATe?
Returns
0|1
12.9 [SOURce:]CURRent[:OVER]:PROTection[:
LEVel] <NRf+>
This command is used to set the limit value of overcurrent protection.
Group
SOURce
Syntax
[SOURce:]CURRent[:OVER]:PROTection[:LEVel] <NRf+>
Arguments
<NRf+>
MINimum|MAXimum|DEFault|<value>
Setting range: MIN to MAX
Default Value
None
Example
CURR:PROT 1
Copyright © Itech Electronic Co., Ltd.
SOURce Subsystem
129
Advertisement
Table of Contents
Need help?
Do you have a question about the IT8000 Series and is the answer not in the manual?