Error
Error Message
Code
140
Wrong type of parameter(s)
150
Wrong number of parameters
160
Unmatched quotation mark
(single/double) in parameters
165
Unmatched bracket
170
Command keywords were not
recognized
180
No entry in list to retrieve (num-
ber list or channel list)
190
Too many dimensions in entry
to be returned in parameters
191
Too many char
-150
String data error
-151
Invalid string data [e.g., END
received before close quote]
-158
String data not allowed
-160
Block data error
-161
Invalid block data [e.g., END
received before length
satisfied]
Copyright © Itech Electronic Co., Ltd.
Error Messages
Description
The type of the parameter is
incorrect.
The number of parameters is
incorrect.
The quotation marks (single/
double) in the argument do not
match.
The parentheses do not match.
The command keyword is not
recognized, which is an invalid
command.
The function entry is incorrect.
For example, three parameters
are sent to the command, and
the system program only proc-
esses two.
There are too many values re-
turned in the argument.
The number of characters ex-
ceeds the limit. For example,
when using serial port or USB
communication, the transmitted
data length is greater than 256.
The string data is incorrect.
Invalid string data. For exam-
ple, the END flag was received
before the command reference
was closed.
The data type is not allowed as
a string.
Block data is incorrect.
Invalid block data. For exam-
ple, the END flag was received
before the data length met the
requirements.
181
Need help?
Do you have a question about the IT8000 Series and is the answer not in the manual?