System:communicate:gpib:address <Nr1; System:communicate:gpib:address - ITech IT8000 Series Programming Manual

SYSTem:COMMunicate:GPIB:ADDRess <NR1>
This command is used to set the GPIB communication address.
Group
System
Syntax
SYSTem:COMMunicate:GPIB:ADDRess <NR1>
Arguments
<NR1>
Setting range: 1 to 30
Default Value
1
Returns
None
Example
SYST:COMM:GPIB:ADDR 2
Also see

SYSTem:COMMunicate:GPIB:ADDRess?

SYSTem:COMMunicate:GPIB:ADDRess?
This command is used to query the GPIB communication address.
Group
System
Syntax
SYSTem:COMMunicate:GPIB:ADDRess?
Copyright © Itech Electronic Co., Ltd.
SYSTem Subsystem
25