ITech IT8000 Series Programming Manual page 197

Error Error Message
Code
11 CVDAC selftest 1
12 CVDAC selftest 2
13 CCDAC selftest 1
14 CCDAC selftest 2
15 CRDAC selftest 1
16 CRDAC selftest 2
20 Input Down
40 Flash write failed
41 Flash erase failed
80 Digital I/O selftest error
Device related errors
213 RS232 buffer overrun error
216 RS232 receiver framing error
217 RS232 receiver parity error
218 RS232 receiver overrun error
220 Front panel uart overrun
221 Front panel uart framing
222 Front panel uart parity
223 Front panel buffer overrun
Copyright © Itech Electronic Co., Ltd.
Error Messages
Description
In CV mode, DAC channel 1
self-test failed.
In CV mode, DAC channel 2
self-test failed.
In CC mode, DAC channel 1
self-test failed.
In CC mode, DAC channel 2
self-test failed.
In CR mode, DAC channel 1
self-test failed.
In CR mode, DAC channel 2
self-test failed.
Input drop
Writing to flash failed.
Failed to erase the flash.
Digital I/O self-test error
RS232 buffer overflow
RS232 receiver frame error
RS232 receiver parity error
RS232 receiver overflow
The serial port communication
between the front panel and
the control board overflows.
The serial port frame between
the front panel and the control
board is incorrect.
The serial port parity between
the front panel and the control
board is incorrect.
The serial port buffer between
the front panel and the control
board overflows.
184