Status:operation:enable <Nr1 - ITech IT8000 Series Programming Manual

Example
STATus:OPERation[:EVENt]?
Also see
None
STATus:OPERation:ENABle <NR1>
Sets the value of the enable register for the Operation Status group. The enable
register is a mask for enabling specific bits from the Operation Event register to
set the OPER (operation summary) bit of the Status Byte register. STATus:
PRESet clears all bits in the enable register. *CLS does not clear the enable
register, but does clear the event register.
Group
STATus
Syntax
STATus:OPERation:ENABle <NR1>
Arguments
<NR1>
A decimal value corresponding to the binary weighted sum of the register's bits.
Setting range: 0 to 65535.
Default Value
0
Example
Enable bit 3 and 4 in the enable register: STATus:OPERation:ENABle 24
Query Syntax
STATus:OPERation:ENABle?
Copyright © Itech Electronic Co., Ltd.
STATus Subsystem
82