Arb Subsystem; Arb:udefined:count <Nr1 - ITech IT8000 Series Programming Manual

15

ARB Subsystem

♦ ARB:UDEFined:COUNt <NR1>
♦ ARB:FUNCtion <CPD>
♦ ARB:UDEFined:LEVel <NR1>,<NRf+>
♦ ARB:UDEFined:DWELl <NR1>,<NRf+>
♦ ARB:UDEFined:SLEW <NR1>,<NRf+>
♦ ARB:COUNt <NRf+>
♦ ARB:SAVE <NR1>
♦ ARB:RECall <NR1>
15.1 ARB:UDEFined:COUNt <NR1>
This command is used to set the total number of steps in the LIST. Before set-
ting the amplitude, time width and slope, you must execute this command firstly
to set the total number of steps in the LIST.
Group
ARB
Syntax
ARB:UDEFined:COUNt <NR1>
Arguments
<NR1>
MIN|MAX|<value>
Setting range: 1 to 200
Example
ARB:UDEFined:COUNt 6
Query Syntax
ARB:UDEFined:COUNt?
Returns
<NR1>
Copyright © Itech Electronic Co., Ltd.
ARB Subsystem
156