[Configurable:]Io:reverse? <Nrl - ITech IT8000 Series Programming Manual

Arguments
<NRL>, <Bool>
0 to 6, 0|OFF|1|ON
Default Value
0, 0|OFF
Returns
None
Example
Reverse the signal of the pin 1: IO:REV 0, 1
Also see
[CONFigurable:]IO:REVerse? <NRL>
[CONFigurable:]IO:REVerse? <NRL>
This command is used to query whether the digital signal of the specified pin is
inverted.
Group
CONFigurable
Syntax
[CONFigurable:]IO:REVerse? <NRL>
Arguments
<NRL>
0 to 6
Default Value
None
Copyright © Itech Electronic Co., Ltd.
CONFigurable Subsystem
44