Idn - ITech IT8000 Series Programming Manual

•
•
Group
None
Syntax
*ESR?
Arguments
None
Default Value
None
Returns
<NR1>
Example
*ESR?
Also see
None

*IDN?

Identification Query. Returns instrument's identification string, which contains
four comma-separated fields. The first field is the manufacturer's name, the sec-
ond field is the instrument model number, the third field is the serial number,
and the fourth field is the firmware revision.
Group
None
Any or all conditions can be reported to the ESB bit through the enable regis-
ter. To set the enable register mask, write a decimal value to the register us-
ing *ESE.
Once a bit is set, it remains set until cleared by this query or *CLS.
Copyright © Itech Electronic Co., Ltd.
IEEE-488 Common Commands
166