Xylem Ai1 Product Manual page 88

i.e., YES OPTUS 50502 as shown below. This step is often enough to force the Ai1 to connect. If this is the
case, note the Operator ID connected. Otherwise note all available operator codes at this stage (50501,
50502, 50503 in this example) as these will be tested one-by-one.
3. Manually test each Operator or specify the successfully connected Operator. Switching back to Settings
Editor \ Cellular, switch Cell List Network Operators back to Disabled, and enter the Operator ID to use
under Cell Network Operator ID (as shown below). If currently
connected, this is the ID for the connected Operator. If not
currently connected, try each Operator code noted earlier, one-by-
one. Click apply and then reconnect, confirming if this was
successful.
4. If a connection still fails, follow the steps under "Capture Modem Responses" and email your support
representative.
Page | 88