Mercedes-Benz GLE Owner's Manual page 526

The vehicle has been prepared for a wheel
R
change ( page 522).
→
The hub caps have been removed .
R
Important notes on using the jack:
Only use the vehicle-specific jack that has
R
been tested and approved by Mercedes-Benz
to raise the vehicle.
The jack is only designed for raising and
R
holding the vehicle for a short time while a
wheel is being changed and not for mainte‐
nance work under the vehicle.
The jack must be placed on a firm, flat and
R
non-slip surface. If necessary, use a large,
flat, load-bearing, non-slip underlay.
The foot of the jack must be positioned verti‐
R
cally under the jacking point.
Rules of conduct when the vehicle is raised:
Never place your hands or feet under the
R
vehicle.
Do not lie under the vehicle.
R
Do not start the engine and do not release
R
the electric parking brake.
Do not open or close any doors or the tail‐
R
gate.
Wheels and tyres 523
Using the wheel wrench, loosen the wheel
#
bolts on the wheel you wish to change by
about one full turn. Do not unscrew the bolts
completely.