Mercedes-Benz GLE Owner's Manual page 151

148 Light and sight
Operating the combination switch for the
lights
1
High beam
2 Indicator, right
3 Headlamp flasher
4 Indicator, left
Use the combination switch to activate the
#
desired function.
High beam
To switch on: turn the light switch to the
#
L or à position.
Press the combination switch in the direction
#
of arrow 1.
When the high beam is activated, the indica‐
tor lamp for low beam L is deactivated
and replaced by the indicator lamp for the
high beam K.
To switch off: press the combination switch
#
in the direction of arrow 1
direction of arrow 3.
Headlamp flasher
Pull the combination switch in the direction
#
of arrow 3.
Turn signal lights
To indicate briefly: press the combination
#
switch briefly to the point of resistance in the
direction of arrow 2 or 4.
The corresponding indicator will flash three
times.
To indicate permanently: press the combi‐
#
nation switch beyond the point of resistance
in the direction of arrow
Vehicles with Active Lane Change Assist
The Active Lane Change Assist can:
lengthen indicator operation for the dura‐
R
tion of the lane change if the driver has
activated the indicator.
automatically activate the turn signal indi‐
R
cator if the driver indicated to turn in that
or pull in the
direction immediately beforehand but a
lane change was not immediately possi‐
ble.
2 or 4.