Mercedes-Benz GLE Owner's Manual page 119

116 Seats and stowing
* NOTE Damage to the seats caused by
objects or documents when the seat
heater is switched on
When the seat heater is switched on, over‐
heating can occur due to objects or docu‐
ments placed on the seats e.g. seat cushions
or child seats. This could cause damage to
the seat surface.
Make sure that no objects or docu‐
#
ments are on the seats when the seat
heater is switched on.
Requirements:
The power supply has been switched on
R
( page 177).
→
1 Seat heating in the cockpit
To switch on: press the 1
#
All indicator lamps are on.
To reduce the level: press button
#
repeatedly until the desired heating level is
set.
Depending on the heating level, up to three
indicator lamps light up.
To switch off: press button
#
until all the indicator lamps go out.
% The seat heater automatically switches down
from the three heating levels after 8, 10 and
20 minutes until the seat heater is switched
off.
Setting the panel heating
Multimedia system:
©
,
cle) Panel heating
.
When the seat heater is switched on, the armr‐
ests, the centre panels of the doors and the
centre console can be heated.
Switch the function for the desired seats on
#
or off.
button.
Switching the seat ventilation on/off
1
Requirements:
The power supply is switched on
R
( page 177).
→
1 repeatedly
Settings Fahrzeug (Vehi‐
. .