Mercedes-Benz GLE Owner's Manual page 136

Partition net without load compartment
enlargement
Partition net with load compartment enlarge‐
ment
To attach: extend and unfold the partition
#
net.
The joints on the top and bottom guide rods
will engage audibly.
Attach the top guide rod to the holders
#
on the roof lining.
Engage the hooks
#
the left and right.
Pull at the loose ends of the lashing straps
#
until the partition net is tight.
After driving a short distance, check the ten‐
#
sion of the partition net and re-tension it if
necessary.
To remove: pull the belt clamps until the
#
lashing straps are loose.
Remove the hooks
#
on the left and right.
Remove the top guide rod from the holders
#
1.
To stow: press the red buttons on the top
#
and bottom guide rods.
Fold up and retract the partition net.
#
Overview of the tie-down eyes in the load
compartment
Observe the notes on loading the vehicle
1 ( page 121).
→
Seats and stowing 133
2 in the eyelets 3 on
2 from the eyelets 3