Mercedes-Benz GLE Owner's Manual page 412

To start in the map: select
#
Move the map ( page 405).
→
#
To start via destination search: select
#
address entry.
Enter the address ( page 377).
→
#
Select the destination in the list or accept
#
with a.
The map appears.
To show an area: tap or press on the control
#
element.
A red rectangle appears. This designates the
area that should be avoided.
To change the map scale: move two fingers
#
apart or together on the media display or on
the touchpad.
The map is zoomed in or out.
To set an area: tap or press on the control
#
element.
The area is entered into the list.
Changing an area to be avoided
Using map.
Multimedia system:
©
,
Via
tion Z
.
options
.
Select an area in the list.
#
Select Edit.
#
To move an area on the map: swipe in any
#
direction on the control element.
To change the size of the area: tap or press
#
on the control element.
Swipe up or down on the control element.
#
Tap or press on the control element.
#
To take account of an area for the route:
#
select an area from the list.
Activate
#
The display button is activated.
If route guidance is active, a new route is cal‐
culated.
If there is no route yet, the setting is carried
over to the next route guidance.
Naviga-
.
Advanced Route
. . .
Avoid areas
Avoid area.
MBUX multimedia system 409
The route can include an area that is to be
avoided in the following cases:
the destination is located in an area that
R
is to be avoided.
Avoid
the route includes motorways or multi-
R
lane expressways which pass through an
area to be avoided.
there is no sensible alternative route.
R
Deleting an area
Multimedia system:
© Naviga-
, .
tion Z Advanced
. .
options Avoid areas
.
To delete an area: select an area in the list.
#
Select Delete.
#
Confirm the prompt with Yes.
#
To delete all areas: if at least two areas to
#
avoid are set, select
Confirm the prompt with Yes.
#
Route Avoid
. .
Delete all.