Mercedes-Benz GLE Owner's Manual page 194

Configuring DYNAMIC SELECT (multimedia
system)
Multimedia system:
© Settings Vehi-
, . .
cle DYNAMIC SELECT
.
Setting drive program I
Select Individual config..
#
Select and set a category.
#
Switching the reset display on/off
Switch Ask when starting on or off.
#
Function on: the next time the vehicle is started
a prompt appears asking whether the drive pro‐
gram last active should be restored. If the ECO
start/stop function was deactivated, an addi‐
tional prompt appears asking if the function
should remain deactivated.
% The prompt appears only if the previously
active settings deviate from the standard
settings.
Function off: the next time the vehicle is star‐
ted the Comfort drive program is set automati‐
cally. The ECO start/stop function is activated
automatically.
% This function must be activated for each user
profile separately. Only when this function is
activated will the drive program and Eco
start/stop setting for the previous journey
be saved for the respective user profile.
Displaying vehicle data
Multimedia system:
© Info
, .
Select Vehicle.
#
The vehicle data is displayed.
Displaying engine data
Multimedia system:
© Info
, .
Select Engine.
#
The engine data is displayed.
% The values for engine output and engine tor‐
que may deviate from the nominal values.
Driving and parking 191
Items that can influence this are, for exam‐
ple:
Sea level
R
Fuel grade
R
Outside temperature
R
Calling up fuel consumption indicator
Multimedia system:
© Info
, .
Select Consumption.
#
The current and average fuel consumption is
displayed.