Cable Specifications; Cable Lengths And Cross-Sections For Control Cables; Control Input/Output And Control Data; Digital Inputs - Danfoss VLT AQUA FC 202 Design Manual

VLT® AQUA Drive FC 202
Design Guide
- with full output power of typical EFF2 motors (up to 90% output
current)
- at full continuous FC output current
Minimum ambient temperature during full-scale operation
Minimum ambient temperature at reduced speed performance
Temperature during storage/transport
Maximum altitude above sea level without derating
Maximum altitude above sea level with derating
EMC standards, Emission
EMC standards, Immunity
Energy efficiency class
(2)
For more information, see the Derating section in the design guide.
1
2 Determined according to 61800-9-2 at:
• Rated load.
• 90% rated frequency.
• Switching frequency factory setting.
• Switching pattern factory setting.
• MyDrive® ecoSmart provides efficiency and part loss data for the drive according to 61800-3.
™

8.5 Cable Specifications

8.5.1 Cable Lengths and Cross-sections for Control Cables

Maximum motor cable length, shielded/armored
Maximum motor cable length, unshielded/unarmored
Maximum cross-section to motor, mains, load sharing, and
brake
(1)
Maximum cross-section to control terminals, rigid wire
Maximum cross-section to control terminals, flexible wire
Maximum cross-section to control terminals, cable with enclosed
core
Minimum cross-section to control terminals
1 See electrical data tables in 8.1.1 Mains Supply 1x200–240 V AC
It is mandatory to ground the mains connection properly using T95 (PE) of the frequency converter. The ground connection cable
cross-section must be at least 10 mm
cable.

8.6 Control Input/Output and Control Data

8.6.1 Digital Inputs

Programmable digital inputs
Terminal number
Logic
Voltage level
Voltage level, logic 0 PNP
Voltage level, logic 1 PNP
Voltage level, logic 0 NPN
Voltage level, logic 1 NPN
Danfoss A/S © 2020.09
to 8.1.6 Mains Supply 3x525–690 V AC
2
(8 AWG) or 2 rated mains wires terminated separately according to EN 50178. Use unshielded
Specifications
Maximum 50° C (122° F)
Maximum 50° C (122° F)
-10 °C (14 °F)
-25 to +65/70 °C (-13 to +149/158 °F)
1000 m (3280 ft)
3000 m (9843 ft)
150 m (492 ft)
300 m (984 ft)
1.5 mm
1 mm
0.5 mm
0.25 mm
for more information.
18, 19, 27 , 29
(1)
AJ300847815559en-000101 / 130R0337 | 91
(1)
(1)
0 °C (32 °F)
EN 61800-3
EN 61800-3
IE2
2
/16 AWG
2
/18 AWG
2
/20 AWG
2
/24 AWG
4 (6)
, 32, 33
(1)
PNP or NPN
0–24 V
<5 V DC
>10 V DC
>19 V DC
<14 V DC