Danfoss VLT AQUA FC 202 Design Manual page 62

VLT® AQUA Drive FC 202
Design Guide
B
D
E
Illustration 44: IP21/Nema Type 1 Kit on A3 Enclosure
A Top cover
B Brim
C Base part
Place the top cover as shown. If an A or B option is used, fit the brim to cover the top inlet. Place the base part C at the bottom of the
drive and use the clamps from the accessory bag to correctly fasten the cables.
Holes for cable glands:
• Enclosure size A2: 2x M25 and 3xM32.
• Enclosure size A3: 3xM25 and 3xM32.
62 | Danfoss A/S © 2020.09
A
C
Options and Accessories Overview
D Base cover
E Screw(s)
AJ300847815559en-000101 / 130R0337