Danfoss VLT AQUA FC 202 Design Manual page 147

VLT® AQUA Drive FC 202
Design Guide
RFI filter type
0.37–7.5 kW, 380–
480 V
11–90 kW, 380–
480 V
(2)
7.5 kW, 380–480 V
11–30 kW, 525–
690 V
(2)(3)
37–90 kW, 525–
690 V
(2)(4)
H3
FC 202 0.25–45 kW, 200–
240 V
0.37–90 kW, 380–
480 V
H4
FC 202 1.1–30 kW, 525–
690 V
(3)
37–90 kW, 525–
690 V
(4)
Hx
(5)
FC 202 1.1–90 kW, 525–
600 V
15–22 kW, 200–
240 V
11–37 kW, 380–
480 V
100 m (328 ft) for phase-neutral, 150 m (492 ft) for phase-to-phase (but not from TT or TN). Single-phase drives are not intended for 2-phase supply
1
from a TT or TN network.
2 T7, 37–90 kW complies with class A group 1 with 25 m (82 ft) motor cable. Some restrictions for the installation apply (contact Danfoss for details).
Enclosure size B2.
3
Enclosure size C2.
4
Hx versions can be used according to EN/IEC 61800-3 category C4.
5
• Hx, H1, H2, H3, H4, or H5 is defined in the type code positions 16–17 for EMC filters.
• H1: Integrated EMC filter. Fulfills EN 55011 Class A1/B and EN/IEC 61800-3 Category 1/2.
• H2: A limited RFI filter only containing capacitors and without a common-mode coil. Fulfills EN 55011 Class A2 and EN/IEC
61800-3 Category 3.
• H3: Integrated EMC filter. Fulfills EN 55011 Class A1/B and EN/IEC 61800-3 Category 1/2.
• H4: Integrated EMC filter. Fulfills EN 55011 Class A1 and EN/IEC 61800-3 Category 2.
• H5: Marine versions. Ruggedized version, fulfills the same emission levels as H2 versions.
Danfoss A/S © 2020.09
Conducted emission
T4 No No
T4 No No
S4 No No
T7 No No
T7 No No
T2 10 (32.8) 50 (164)
T4 10 (32.8) 50 (164)
T7 No 100 (328)
No 150 (492)
T6 No No
S2 No No
S4 No No
Radiated emission
5 (16.4) No
25 (82) No
25 (82) No
25 (82) No
25 (82) No
50 (164) No
50 (164) No
100 (328) No
150 (492) No
No No
No No
No No
AJ300847815559en-000101 / 130R0337 | 147
Electrical Installation
Considerations
No Yes
No Yes
No Yes
No Yes
No Yes
Yes Yes
Yes Yes
Yes Yes
Yes Yes
No No
No No
No No