Ambient Conditions; Cable Specifications - Danfoss VLT FC 102 Instruction Manual

Specifications

8.4 Ambient Conditions

Environment
IP rating
Vibration test
Max. relative humidity
Aggressive environment (IEC 60068-2-43) H
3)
Ambient temperature
Minimum ambient temperature during full-scale operation
Minimum ambient temperature at reduced performance
Temperature during storage/transport
Maximum altitude above sea level without derating
Derating for high altitude, see special conditions in the Design Guide.
EMC standards, Emission
EMC standards, Immunity
See section on special conditions in the Design Guide.
≤ 3.7 kW (200–240 V), ≤ 7.5 kW (400–480 V)
1) Only for
≤ 3.7 kW (200–240 V), ≤ 7.5 kW (400–480 V)
2)
As enclosure kit for
3)
Derating for high ambient temperature, see special conditions in the Design Guide

8.5 Cable Specifications

Cable lengths and cross-sections for control cables
Max. motor cable length, shielded
Max. motor cable length, non-shielded
Maximum cross-section to control terminals, flexible/ rigid wire without cable end sleeves
Maximum cross-section to control terminals, flexible wire with cable end sleeves
Maximum cross-section to control terminals, flexible wire with cable end sleeves with collar
Minimum cross-section to control terminals
1)
For power cables, see electrical data tables in 8.1 Electrical Data.
®
VLT HVAC Drive Instruction Manual
1)
IP00/Chassis, IP20 /Chassis, IP21
5%–93% (IEC 721-3-3; Class 3K3 (non-condensing) during operation
S test
2
EN 61000-4-2, EN 61000-4-3, EN 61000-4-4, EN 61000-4-5, EN 61000-4-6
1)
MG11AJ22 - Rev. 2013-09-13
2)
/Type 1, IP54/Type 12, IP55/Type 12, IP66/Type 4X
Max. 50 °C (24-hour average maximum 45 °C)
EN 61800-3, EN 61000-6-3/4, EN 55011
EN 61800-3, EN 61000-6-1/2,
1.0 g
class Kd
0 °C
- 10 °C
-25 to +65/70 °C
1000 m
8
150 m
300 m
2
1.5 mm /16 AWG
2
1 mm /18 AWG
0.5 mm 2 /20 AWG
0.25 mm 2 /24AWG
63
8