Danfoss VLT AQUA FC 202 Design Manual page 6

VLT® AQUA Drive FC 202
Design Guide
7.7.5 VLT® Brake Resistors
7.7.6 VLT® Line Reactors
7.8 Kits and Accessories
7.8.1 Panel Through Mounting Kits for VLT® FC Series Enclosure Sizes A, B, and C (IP21)
7.8.2 IP21/NEMA Type 1 Enclosure Kits for VLT® FC Series Enclosure Sizes A, B, and C
7.8.3 Mounting Brackets for VLT® FC Series Enclosure Sizes A5, B1, B2, C1, and C2
7.8.4 Remote Mounting Kits for LCP
7.8.4.1 Remote Mounting Kit for LCP 102 and LCP 103 with Cover for Outdoor Mounting
7.8.4.2 Panel Mounting Kit for LCP 102, LCP 101, and LCP 103
7.8.5 VLT® Wireless Communication Panel LCP 103
8 Specifications
8.1 Electrical data
8.1.1 Mains Supply 1x200-240 V AC
8.1.2 Mains Supply 3x200-240 V AC
8.1.3 Mains Supply 1x380-480 V AC
8.1.4 Mains Supply 3x380-480 V AC
8.1.5 Mains Supply 3x525-600 V AC
8.1.6 Mains Supply 3x525-690 V AC
8.2 Mains Supply
8.3 Motor Output and Motor Data
8.3.1 Motor Output (U, V, W)
8.3.2 Torque Characteristics, Normal Overload
8.3.3 Torque Characteristics, High Overload
8.4 Ambient Conditions
8.4.1 Environment
8.5 Cable Specifications
8.5.1 Cable Lengths and Cross-sections for Control Cables
8.6 Control Input/Output and Control Data
8.6.1 Digital Inputs
8.6.2 STO Terminal 37 (Terminal 37 is Fixed PNP Logic)
8.6.3 Analog Inputs
8.6.4 Pulse Inputs
8.6.5 Digital Outputs
8.6.6 Analog Output
8.6.7 Control Card, 24 V DC Output
8.6.8 Control Card, +10 V DC Output
8.6.9 Control Card, RS485 Serial Communication
6 | Danfoss A/S © 2020.09
Contents
AJ300847815559en-000101/130R0337
59
60
60
60
61
65
66
66
68
69
71
71
71
72
76
77
82
86
89
90
90
90
90
90
90
91
91
91
91
92
92
93
93
93
93
93
94