Removing The Rotor - Thermo Scientific FIBERLite F15-8x50c Instruction Manual

4. Close the centrifuge door.

Removing the Rotor

To remove the rotor, proceed as follows:
1. Open the centrifuge door.
2. Grab the rotor handle with both hands and press against the green AutoLock
same time, pull the rotor directly upwards with both hands and remove it from the centrifuge
spindle. Make sure not to jam the rotor while doing this.
Thermo Scientific
CAUTION Check that the rotor is properly locked on the centrifuge spindle before each
use by pulling it a its handle.
Be sure to check all seals before starting any aerosol-tight applications.
3 TM
AutoLock
Removing the Rotor
TM
button. At the
75003663 F15-8x50c 3-3