O P E R A T I O N
M A N U A L
BI-AMP MODE
For bi-amp mode, you need two
Bi-amp mode is possible if your loudspeakers have separate connections for low
and mid-high frequencies.
In bi-amp mode, the particularly important mid-high range benefits directly
from the fact that the relevant power amplifier channels are unburdened by the
power-intensive low range. This leads to a significantly improved imaging and
a more precise locatability of voices and instruments.
For bi-amp mode, use one Burmester bi-amp adapter per amplifier.
Ask your dealer for more information.
There are two different connection variants for bi-amp mode,
which are described below.
3 0 | 4 6
218
power amplifiers to play a stereo signal.
ATTENTION!
For bi-amp mode, make sure to remove the connection
jumpers between the low frequency and med-high frequency paths at your
loudspeakers! Otherwise, your amplifiers and your loudspeakers may
be damaged.
When connecting, also observe the operation manual for your loudspeakers.