Table of Contents
Advertisement
O P E R A T I O N
M A N U A L
Switching the APD on and off with the remote control
To switch off the APD function with the remote control, press the (RESUME) button.
The front LED (
$
To switch the APD function back on with the remote control, press the (RESUME)
button again.
The front LED (
$
Switching the APD on and off via BurLink
Switching the APD on and off via BurLink is described in the section "BurLink".
REMOTE
The remote connection allows you to switch your Burmester devices on or off
remotely. If you connect the REMOTE OUT (
REMOTE IN jack on a Burmester device, you will be able to switch it on and off
remotely when switching the
the master function.
If you connect the REMOTE IN (
jack on a Burmester device, you will be able to switch the
when switching the device in question on and off. In this operating mode, the
relegated to the slave function.
3 8 | 4 6
) briefly flashes red three times to confirm.
2
2
) briefly flashes green three times.
) jack of the
9
on and off. In this operating mode, the
218
) jack of the
8
218
to the corresponding
218
takes over
218
to the corresponding REMOTE OUT
on and off remotely
218
is
218
Advertisement
Table of Contents
