Burmester 218 Operation Manual page 41

OVERHEATING
If the permissible operating temperature in the
circuit responds.
Causes for excessive temperature in the
— Overloading the device by playing music at a very high sound pressure level
for a long period of time
— Room temperature too high (>
— Insufficient ventilation of the device
To reset the protection function:
Switch off the completely by setting the power switch (
1. 218
device to OFF position.
Wait until the device has cooled down (approx.
2.
If necessary, ensure a lower room temperature and a free placement of the device.
3.
Switch the back on with the power switch (
4. 218
on the front of the device.
Only switch on the device if you are sure that your preamplifier is set to
a low volume.
Avoid listening at high volume levels for long periods of time.
2 1 8
218 is exceeded, the protective
may include:
218
30 °C)
minutes).
30
) and press the POWER button (
6
P O W E R A M P L I F I E R
) on the back of the
6
)
1
4 1 | 4 6