Connection And Operating Modes; Stereo Mode - Burmester 218 Operation Manual

O P E R A T I O N M A N U A L
Connecting and operating modes
Burmester stereo power amplifiers can be connected and operated in various ways.
These are explained below. You should determine the optimum operating mode for
you by ear and your personal preferences in order to achieve the best possible
listening experience. Your dealer will be happy to help you with this.

STEREO MODE

In stereo mode, each of your two stereo loudspeakers is controlled by one power
amp channel of the
1. Connecting a preamplifier for stereo mode
Prepare to connect your devices by placing the
Make sure that all connections are easily accessible.
Switch off the
Connect your devices as shown in figure 1:
Connect the right and left outputs of your preamplifier to the inputs of the right and
left channels (
If your preamplifier does not have the appropriate outputs, you can use the
enclosed adapters. Please ask your dealer about this if necessary.
2. Connecting the loudspeakers for stereo mode
Connect your loudspeakers as shown in figure
When connecting, also observe the operation manual for your loudspeakers.
Correct polarity
When connecting the loudspeakers, make sure that the connections have the correct
polarity. It is important that you make all connections in phase:
positive output of the power amplifier (+) = positive input of the loudspeaker (+)
negative output of the power amplifier (-) = negative input of the loudspeaker (-)
2 6 | 4 6
218 .
and all other components before connecting.
218
), ( ) of the . Use balanced XLR cables for this purpose.
4 10 218
near your preamplifier.
218
.
1