O P E R A T I O N
M A N U A L
Error indication and troubleshooting
The
power amplifier is equipped with extensive protection circuits that protect
218
it and the connected loudspeakers from damage in the event of a fault.
The protective circuits of the
this is indicated by the LED (
The LED flashes orange in the event of an error.
Troubleshooting of the following errors can be carried out by the user:
OVERVOLTAGE AT THE OUTPUT DUE TO SHORT CIRCUIT IN THE WIRING
To reset the protection function:
Switch off the
1.
the device to OFF position.
2.
Check the wiring between the power amplifier and the loudspeakers and
correct any errors:
—
Make sure that there is firm contact between all connections.
—
The positive and negative connections of the loudspeaker cables must not touch
each other under any circumstances.
—
Make sure that no conductive parts of the loudspeaker wiring get into contact
with the housing of the
For bi-amp mode, make sure that the bi-amp jumpers of your loudspeakers have
—
been removed.
Switch the
3.
on the front of the device.
4 0 | 4 6
218
react to various errors. If an error occurs,
) on the front.
2
completely by setting the power switch (
218
.
218
back on with the power switch (
218
The music playback is interrupted.
) on the back of
6
) and press the POWER button (
6
)
1