Attach To Hip-Flip (Optional); Figure 1-8 Hip-Flip Accessory - LXE MX3X Reference Manual

Getting Started

Attach to Hip-Flip (Optional)

Note:
Note:
Once the MX3X is attached to the hip-flip and the hip-flip securely fastened to the user by a belt
around their waist, the MX3X can be operated at a convenient height, leaving the user's hands
free.
The hip-flip adjusts downward to allow removing and replacing the main battery without
removing the unit from the hip-flip or the user's body.
The MX3X must be removed from the hip-flip before being placed in a docking station.
Caution:
Installation
1. If the MX3X has a handstrap, remove the handstrap and set it aside along with the
2. Slide the MX3X into the pocket in the hip-flip, making sure the keypad is up and the
3. Place the MX3X (in the hip-flip) on a flat stable surface with the keypad down.
4. Tighten the assembly with the black screws provided, using the holes used for the
5. Test the hip-flip's connection making sure the MX3X is securely attached.
6. Slide the waist-belt through the loop in the hip-flip and secure the belt around your body.
E-EQ-MX3XRG-L
The MX3P does not fit the Hip-Flip accessory. The Hip-Flip is not to be used with the
MX3P device. See "Accessories" for MX3P holding accessories e.g. holster mounted,
shoulder straps, etc.

Figure 1-8 Hip-Flip Accessory

#1 flat head screwdriver is not supplied by LXE. A waist belt accessory can be ordered
from LXE.
Never use the MX3X in the hip-flip without first securing the device to the hip-flip
with the screws.
handstrap screws and washers.
endcap ports are visible in the openings at the base of the hip-flip.
handstrap (if used) on the back of the MX3X.
11
MX3X Reference Guide